Setup Guide for ClevGuard ClevGo Location Spoofer

Change Your Location on Android

Part 1: Connect Your Android Device with PC

1. Get Started

Download and install ClevGo on your computer. Then click "Get Started" to experience it.

2. Connect Your Device

Connect your Android device to the computer with a USB cable.

Then a notification "Choose Your Device" will appear. Confirm your device.

3. Select USB Connection Mode

Ensure that the mobile phone's USB connection mode is Media Transfer Protocol (for LG mobile phones, it should be set as Picture Transfer Protocol).

4. Turn on and Allow USB Debugging

Follow the on-screen instructions in the app to turn on USB debugging.

Click "Allow" to allow USB debugging on your mobile phone.

If the notification is not shown on your device, click "Show Again".

5. Select Mocking Mode

When you finish all the settings, you now can choose either Gaming mode or Social mode whatever that suits your needs.

Part 2: Gaming Mode

Gaming mode works for AR Games only.

1. Check the Disclaimer

Check the box to show that you are aware of the disclaimer then enter Gaming mode.

2. Wait for the Map Loading Process

After selecting the Gaming mode, the program will start to load the map. As some mobile phones might require you to confirm and grant permissions, please keep a close watch on your device during the process.

3. All Set!

Once loading is complete, you should see a popup that says "You're All Set!". Login to your game account on your phone if necessary.

Part 3: Social Mode

The Social mode works for most maps and social apps, such as Google Map, Facebook, WhatsApp, etc.

1. Enter Social Mode

Click the Social mode to enter it.

2. Install ClevGo Assistant

Wait a moment and the program will install "ClevGo Assistant" on your mobile phone. (ClevGo Assistant will not appear on the mobile phone under Android 10. It doesn't need to manually start or operate at any time. Just keep on the phone.)
After the installation is completed, find "Select mock location app" in "Developer options", and select "ClevGo Assistant".

3. All Set!

Now everything is all set. You can change your location or simulate GPS movement.

If you want to switch between two modes, click the icon on the left side of your device name and confirm the change.

Then Click “Yes” to confirm the change.

Part 4: Four Modes of ClevGo

1. Change Your GPS Location Instantly- Teleport Mode

Select " Teleport Mode" in the upper right corner of the dashboard which is the fourth option. Choose a certain location and Click "Move", your location on your device will be changed instantly as well.

2. Simulate GPS Movement- Two-spot Mode

Select "Joystick Mode" in the upper right corner of the dashboard which is the first option. Click "Move" to change location automatically. You can change location in 360-degree, and move forward or backward by clicking the direction button, arrow keys and WSAD keys to go up, down, left or right.

3. Simulate GPS Movement- Multi-spot Mode

Select "Multi-spot Mode" in the upper right corner of the dashboard which is the third option. you can choose many different spots (up to 100) on the map to pass by when simulating the movement. Now you can set up the numbers of moving times and the speed by dragging the speed bar. Once everything is set, click "Move" to start.

4. Spoof GPS Location with Flexibility - Joystick Mode

Select " Teleport Mode" in the upper right corner of the dashboard which is the fourth option. Choose a certain location and Click "Move", your location on your device will be changed instantly as well.

Part 5: More Exclusive Features of ClevGo

1. Circle Route

During Multi-spot Mode, if the initial and final location is close to each other, a notification would pop out automatically to ask you if you want to create a circle route. Click "Yes" to connect both spots. Click "No" and everything stays the same.

2. Realistic Mode

"Realistic Mode" applies to "Two-spot Mode" and "Multi-spot Mode". The moving speed will randomly fluctuate between the upper and lower 30% of the selected speed range. The speed varies every 5 seconds.

3. Returns or Loops

When using the "Two-spot Mode" and "Multi-spot Mode" to simulate movement, If the number of moving times is above 1, the user can choose whether to have the device move back and forth along the route or to move in the loop along the route, as needed.

4. Fluctuation Mode

The virtual location will fluctuate back and forth within 5m of the location, which can reduce warnings from other apps about location changes.

5. History Records

All the addresses and routes you used will be saved in the History Records. You could click on the Star icon to collect the chosen spots.

The saved spots or routes will be displayed on your favorite list for further use. Click the Top icon on the left to place your favorites at the top.

6. Import/Export GPX file

ClevGo can import/export GPX files of single and multiple paths to save your favorite routes now. Click the "Up" icon on the left route panel, and you can export the GPX file. Click the "Down" icon on the right of the dashboard, and you can export the GPX file.

7. Cooldown Timer

When you use the "Teleport Mode" or "Jump Teleport Mode" to change your location, you will find the the cooling button in the right corner of the product interface.

Click on this button, the cooldown timer will appear then. When you choose the desired location and initiate the movement, the timer will calculate the appropriate cooldown time based on the distance.

If you don't want to use coolling timer function, just click the button again to turn it off.

If you want to recalculate the time when you modifying your location, tap "Reset" to refresh it.